Sani Marc Spa Flush Out

This liquid cleaner is used to dislodge and remove dirt, biofilms and organic debris in the pipes of spas, hot tubs and whirlpool baths. Also can help prevent the buildup of residue that can clog jets.

How to use:

• Remove headrests and filters to avoid damage
• Pour directly over the surface of the water, then run pump(s) on high speed for one hour.
• If excessive foaming occurs, turn off jets. Once foaming subsides, restart the pump cycle.
• Drain water from hot tub, spa or whirlpool bath and rinse well to eliminate all debris.
• Wipe surfaces with a clean cloth
• For hot tubs and spas, refill with fresh water and balance.
• Reinstall filters and headrests:

• Each bottle treats up to 2,000 litres of water
• It is recommended to repeat the procedure before each water change